Store in the dark at 2-8°C. Do not freeze. Avoid prolonged exposure to light. Do not use after expiration date stamped on vial label.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgM monoclonal antibody (clone PFR-03) reacts with undefined epitope on a plant pathogen.
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Clone number:
RTG2B1-2
Antibody Isotype:
IgG2b
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
This rat IgG2b kappa monoclonal antibody (clone RTG2B1-2, also known as G2B-1-2 or KLH/G2B-1-2) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2B1-2
Antibody Isotype:
IgG2b
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This rat IgG2b kappa monoclonal antibody (clone RTG2B1-2, also known as G2B-1-2 or KLH/G2B-1-2) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2B1-2
Antibody Isotype:
IgG2b
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
This rat IgG2a kappa monoclonal antibody (clone RTG2A1-1, also known as G2A-1-1 or KLH/G2A-1-1) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2A1-1
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This rat IgG2a kappa monoclonal antibody (clone RTG2A1-1, also known as G2A-1-1 or KLH/G2A-1-1) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2A1-1
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
This rat IgG2a kappa monoclonal antibody (clone RTG2A1-1, also known as G2A-1-1 or KLH/G2A-1-1) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2A1-1
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Clone number:
RTG2A1-1
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This rat IgG2a kappa monoclonal antibody (clone RTG2A1-1, also known as G2A-1-1 or KLH/G2A-1-1) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2A1-1
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PFR-03, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgM molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgM monoclonal antibody (clone PFR-03) reacts with undefined epitope on a plant pathogen.
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PFR-03, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgM molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store in the dark at 2-8°C. Do not freeze. Avoid prolonged exposure to light. Do not use after expiration date stamped on vial label.
Applications:
FC
Additional Info:
This mouse IgM monoclonal antibody (clone PFR-03) reacts with undefined epitope on a plant pathogen.
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PFR-03, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgM molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgM monoclonal antibody (clone PFR-03) reacts with undefined epitope on a plant pathogen.
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store in the dark at 2-8°C. Do not freeze. Avoid prolonged exposure to light. Do not use after expiration date stamped on vial label.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgM monoclonal antibody (clone PFR-03) reacts with undefined epitope on a plant pathogen.
Clone number:
PFR-03
Antibody Isotype:
IgM
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
This rat IgG2b kappa monoclonal antibody (clone RTG2B1-2, also known as G2B-1-2 or KLH/G2B-1-2) detects specifically the hemocyanin of keyhole limpet and can be used as a negative control antibody in other species.
Clone number:
RTG2B1-2
Antibody Isotype:
IgG2b
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PPV-07, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG3 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgG3 monoclonal antibody (clone PPV-07) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-07
Antibody Isotype:
IgG3
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Clone number:
PPV-07
Antibody Isotype:
IgG3
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG3 monoclonal antibody (clone PPV-07) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-07
Antibody Isotype:
IgG3
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG3 monoclonal antibody (clone PPV-07) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-07
Antibody Isotype:
IgG3
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PLRV219, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished. _x000D_
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgG2b monoclonal antibody (clone PLRV219) reacts with undefined epitope on a plant pathogen.
Clone number:
PLRV219
Antibody Isotype:
IgG2b
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
ELISA,FC,IP,WB,IHC,ICC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
WB,ELISA,ICC,IHC,IP,FC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MPC-11 was generated against an epitope irrelevant for human, mouse, and rat material, and can thus be used for evaluation of the background staining that is caused by general nonspecific interactions between an mouse IgG2b molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
KLH-coupled trinitrophenol
Applications:
FC
Additional Info:
This mouse IgG2b (kappa) monoclonal antibody (clone MPC-11) reacts with an epitope irrelevant for a variety of resting, activated, live, and fixed human, mouse, and rat tissues.
Clone number:
MPC-11
Antibody Isotype:
IgG2b k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC,IP,WB,ICC,IHC,ELISA,FA
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PPV-04, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA,FA
Additional Info:
This mouse IgG2a monoclonal antibody (clone PPV-04) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-04
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PPV-04, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgG2a monoclonal antibody (clone PPV-04) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-04
Antibody Isotype:
IgG2a
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC,ICC,WB,IP,IHC,ELISA
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-173, generated against an undefined antigen, does not react specifically with mouse, rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG2a molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Immunogen:
The transplantable plasmacytoma MOPC-173 was induced by intraperitoneal injection of mineral oils into BALB/c mice.
Applications:
FC
Additional Info:
This mouse IgG2a monoclonal antibody (clone MOPC-173) reacts with an unknown epitope. It does not react with a variety of resting, activated, live, and fixed mouse, rat and human tissues.
Clone number:
MOPC-173
Antibody Isotype:
IgG2a k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,WB,IHC,ICC,ELISA,FA
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,WB,IHC,ICC,ELISA
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody PPV-06, generated against a plant pathogen, does not cross-react with other species, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Primary
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
FC,IP,IHC,ICC,WB,ELISA
Additional Info:
This mouse IgG1 monoclonal antibody (clone PPV-06) reacts with undefined epitope on a plant pathogen.
Clone number:
PPV-06
Antibody Isotype:
IgG1
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC,IHC,ICC,WB
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Do not freeze.
Applications:
WB,ELISA,IHC,ICC,IP,FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
The specificity of staining by monoclonal antibodies to target antigens should be verified by establishing the amount of non-specific antibody binding. Especially at higher concentration (more than 15 ?g/ml) the antibody staining usually has consignable background. To this end a non-reactive immunoglobulin of the same isotype is included as a negative control for each specific monoclonal antibody used in a particular immunoassay. The monoclonal antibody MOPC-21, generated against an undefined antigen, does not react specifically with rat and human samples, and hence all the background that could be observed when working with this antibody would be a result of general nonspecific interactions between an mouse IgG1 molecule and the respective sample under the particular conditions. This shall help the customer to set up the experimental conditions so that the nonspecific binding of any antibody is abolished.
Product Type:
Antibodies Isotype Control
Antibody Type:
monoclonal
Storage Temp:
Store at 2-8°C. Protect from prolonged exposure to light. Do not freeze.
Applications:
FC
Additional Info:
This mouse IgG1 kappa monoclonal antibody (clone MOPC-21) with unknown specificity has been confirmed as a good negative control with human and rat species, based on multiple testing on rat and human tissues.
Clone number:
MOPC-21
Antibody Isotype:
IgG1 k
Application Details:
Negative control: The reagent is intended as an isotype control to establish the amount of non-specific antibody binding. For your particular experiment, use the same concentration of this control antibody as the recommended working concentration of the antigen-specific antibody. Also, when working with prediluted antibodies, dilute the isotype control to the same concentration as is the concentration of the antigen-specific antibody in the prediluted antibody solution you are using. If under particular experimental conditions the background signal of the isotype control is too high (usually when working concentrations of used antibodies are above 10 ?g/ml of incubation mixture), change the conditions of your experiment to reduce the background.
10 mM Sodium Phosphate, 0.5 M Sodium Chloride, pH 7.2
Preservative:
0.05% (w/v) Sodium Azide
Storage:
2-8 °C
Country Of Origin:
US Origin
Disclaimer:
For in vitro Laboratory Use Only. Not for diagnostic or therapeutic use. Not for human or animal consumption. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license under any patent of ImmunoReagents, Inc. Product may not be resold or modified for resale without prior written approval of ImmunoReagents, Inc.
100 mM Sodium Phosphate (pH 7.4), 100 mM NaCl, 50 mM Sucrose, 1.5% BSA and 0.01% Thimerosal
Storage:
-20C or colder
Disclaimer:
For in vitro Laboratory Use Only. Not for diagnostic or therapeutic use. Not for human or animal consumption. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license under any patent of ImmunoReagents, Inc. Product may not be resold or modified for resale without prior written approval of ImmunoReagents, Inc.
100 mM Sodium Phosphate (pH 7.4), 100 mM NaCl, 50 mM Sucrose, 1.5% BSA and 0.01% Thimerosal
Storage:
2-8 °C
Disclaimer:
For in vitro Laboratory Use Only. Not for diagnostic or therapeutic use. Not for human or animal consumption. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license under any patent of ImmunoReagents, Inc. Product may not be resold or modified for resale without prior written approval of ImmunoReagents, Inc.
X63-saporin is an antibody conjugate comprising of the non-specific monoclonal IgG 1 antibody X63, chemically conjugated via a reducible disulfide bridge to the ribosome-inactivating protein saporin, purified from saponaria officinalis . Antibody clone X63 has no known binding ability, and thus can be used as negative control antibody. In combination with saporin, X63-saporin is a useful negative control for targeting IgG1-saporin conjugates such as MC192-saporin.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Lyophilized from a 1 mg/mL solution containing PBS pH 7.2-7.6 without preservative.
Host Animal:
Mouse
Species Reactivity:
Non-Reactive (Negative Control)
Immunogen:
Unknown, naturally isolated IgG that has no known binding target in mammals
Applications:
Negative Control
Clone number:
X63
Antibody Isotype:
IgG1, kappa
Application Details:
Negative control for targeting IgG1-saporin conjugates., for instance MC192-saporin. X63-saporin should be used at a concentration equal to that of the test antibody-saporin conjugate.
Biological Activity:
None. Routinely tested for absence of killing of rat C6 cells in vitro. Note that the primary use of X63-saporin is for in vivo applications.
Biosensis Brand:
Biosensis®
Conjugate:
Saporin
Shelf Life:
12 months after date of receipt (unopened vial).
Use:
For research use only.
Specificity:
No staining has ever been identified with this immunoglobulin demonstrating its non-specific value as a control.
Storage:
Lyophilized product is shipped at ambient room temperature. Upon receipt, pulse-centrifuge the vial to collect solid that may be entrapped in the lid. After reconstitution, immediately prepare aliquots and keep the undiluted stock at -80°C for long-term storage. Avoid repeated thaw-freezing. For short-term storage, keep at 2-8°C for up to 2 weeks. it is recommended to handle this product under sterile conditions.
Purification:
Conjugate was purified by ion-exchange chromatography. Purity > 90% by non-reducing SDS-PAGE
Stapledon CJM et al. (2019). Human osteocyte expression of Nerve Growth Factor: The effect of Pentosan Polysulphate Sodium (PPS) and implications for pain associated with knee osteoarthritis. PLoS One. 14(9):e0222602. Application: ICC/IF.
Specificity:
No staining has ever been identified with this immunoglobulin demonstrating its value as a control. N/A
Storage:
The antibody conjugate can be stored at 2-8ºC for up to 4 months with the addition of appropriate antibacterial agent. For long-term storage, aliquot and keep antibody at <-20°C in the dark. Avoid repeated freeze-thaw cycles.
Purification:
FITC-labelled X63 antibody was purified by gel filtration.
100 mM Sodium Phosphate (pH 7.4), 100 mM NaCl, 50 mM Sucrose, 1.5% BSA and 0.01% Thimerosal
Storage:
-20C or colder
Disclaimer:
For in vitro Laboratory Use Only. Not for diagnostic or therapeutic use. Not for human or animal consumption. Suggested applications of our products are not recommendations to use our products in violation of any patent or as a license under any patent of ImmunoReagents, Inc. Product may not be resold or modified for resale without prior written approval of ImmunoReagents, Inc.
X63-saporin is an antibody conjugate comprising of the non-specific monoclonal IgG 1 antibody X63, chemically conjugated via a reducible disulfide bridge to the ribosome-inactivating protein saporin, purified from saponaria officinalis . Antibody clone X63 has no known binding ability, and thus can be used as negative control antibody. In combination with saporin, X63-saporin is a useful negative control for targeting IgG 1 -saporin conjugates such as MC192-saporin.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Lyophilized from a 1 mg/mL solution containing PBS pH 7.2-7.6 without preservative.
Host Animal:
Mouse
Species Reactivity:
Non-Reactive (Negative Control)
Immunogen:
Unknown, naturally isolated IgG that has no known binding target in mammals
Applications:
Negative Control
Clone number:
X63
Antibody Isotype:
IgG1, kappa
Application Details:
Negative control for targeting IgG1-saporin conjugates., for instance MC192-saporin. X63-saporin should be used at a concentration equal to that of the test antibody-saporin conjugate.
Biological Activity:
None. Routinely tested for absence of killing of rat C6 cells in vitro. Note that the primary use of X63-saporin is for in vivo applications.
Biosensis Brand:
Biosensis®
Conjugate:
Saporin
Shelf Life:
12 months after date of receipt (unopened vial).
Use:
For research use only.
Specificity:
No staining has ever been identified with this immunoglobulin demonstrating its non-specific value as a control.
Storage:
Lyophilized product is shipped at ambient room temperature. Upon receipt, pulse-centrifuge the vial to collect solid that may be entrapped in the lid. After reconstitution, immediately prepare aliquots and keep the undiluted stock at -80°C for long-term storage. Avoid repeated thaw-freezing. For short-term storage, keep at 2-8°C for up to 2 weeks. it is recommended to handle this product under sterile conditions.
Purification:
Conjugate was purified by ion-exchange chromatography. Purity > 90% by non-reducing SDS-PAGE
X63-saporin is an antibody conjugate comprising of the non-specific monoclonal IgG1 antibody X63, chemically conjugated via a reducible disulfide bridge to the ribosome-inactivating protein saporin, purified from saponaria officinalis . Antibody clone X63 has no known binding ability, and thus can be used as negative control antibody. In combination with saporin, X63-saporin is a useful negative control for targeting IgG 1 -saporin conjugates such as MC192-saporin.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Lyophilized from a 1 mg/mL solution containing PBS pH 7.2-7.6 without preservative.
Host Animal:
Mouse
Species Reactivity:
Non-Reactive (Negative Control)
Immunogen:
Unknown, naturally isolated IgG that has no known binding target in mammals
Applications:
Negative Control
Clone number:
X63
Antibody Isotype:
IgG1, kappa
Application Details:
Negative control for targeting IgG1-saporin conjugates., for instance MC192-saporin. X63-saporin should be used at a concentration equal to that of the test antibody-saporin conjugate.
Biological Activity:
None. Routinely tested for absence of killing of rat C6 cells in vitro. Note that the primary use of X63-saporin is for in vivo applications.
Biosensis Brand:
Biosensis®
Conjugate:
Saporin
Shelf Life:
12 months after date of receipt (unopened vial).
Use:
For research use only.
Specificity:
No staining has ever been identified with this immunoglobulin demonstrating its non-specific value as a control.
Storage:
Lyophilized product is shipped at ambient room temperature. Upon receipt, pulse-centrifuge the vial to collect solid that may be entrapped in the lid. After reconstitution, immediately prepare aliquots and keep the undiluted stock at -80°C for long-term storage. Avoid repeated thaw-freezing. For short-term storage, keep at 2-8°C for up to 2 weeks. it is recommended to handle this product under sterile conditions.
Purification:
Conjugate was purified by ion-exchange chromatography. Purity > 90% by non-reducing SDS-PAGE
Target:
Isotype control
Uniprot Number:
P20656
Cookies:
X
We use cookies to help personalise and improve your web experience.
By using our website you consent to our use of cookies, some of which may have already been set on your device.
View our Cookie Policy to learn more.