FtsH belong to a family of ATP dependent peptidases. Localized in a chloroplast are following isoforms: FTSH1 (synonymes AAA, FTSH, FTSH Protease 1), Ftsh2 (VAR2, VARIEGATED 2), FtsH5 (VAR1, VARIEGATED 1), FtsH6 (FTSH PROTEASE 6), FtsH7, FtsH8. FtsH9.Localized in mitochondria are following isoforms: FtsH3 (FTSH Protease 3), FtsH4, FtsH10, FtsH11.
Product Type:
Antibody
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Concentration: after adding 225 l of sterile milliQ water final concentration of the standard is 0.1 pmoles/ lProtein standard buffer composition: Glycerol 10%, Tris Base 141 mM, Tris HCl 106 mM, LDS 2%, EDTA 0.51mM, SERVA Blue G250 0.22 mM, Phenol Red 0.175 mM, pH 8.5, 0.1mg/ml PefaBloc protease inhibitor (Roche), 50mM DTT.This standard is ready-to-load and does not require any additions or heating. It needs to be fully thawed and thoroughly mixed prior to using. Avoid vigorous vortexing, as buffers contain detergent. Following mixing, briefly pulse in a microcentrifuge to collect material from cap. This standard is stabilized and ready and does not require heating before loading on the gel.Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized.Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra careto mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing,
Application Details:
Standard curve: 3 loads are recommended (0.5, 2 and 4μl).For most applications a sample load of 0.2μg of chlorophyll will give a FtsH2 signal in this range.Positive control: load per well: a 2 μl load is optimal for most chemiluminescent detection systems.Standard curve: 3 loads are recommended (0.5, 2 and 4 l).For most applications a sample load of 0.2 g of chlorophyll will give a FtsH2 signal in this range.Positive control: a 2 l load per well is optimal for most chemiluminescent detection systems.Non-disulphie dependent dimers and complexes can be also detected using standard western blot methods withmore sensitive detection reagents as ECL Advance or West Pico when loading per well more standard than recommended. They have not been included in the standard calibration.This standard is stabilized and ready and does not require heating before loading on the gel.Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Reconstitution:
For reconstitution add 225 l of sterile water
Molecular Weight:
75 kDa
Selected references:
Li et al. (2016). A Hard Day's Night: Diatoms Continue Recycling Photosystem II in the Dark. Front. Mar. Sci., 08 November 2016
Special application note:
The FtsH2 protein standard can be used in combination with anti-FtsH2 antibodies AS11 1789 to quantitate FtsH2 from a range of cyanobacteria. Global antibodies are raised against highly conserved amino acid sequences in the FtsH protein.Quantitative western blot: detailed method description, video tutorial
Rieske Iron-Sulfur Protein (Q9ZR03)is located in chloroplast thylakoid membrane as a component of cytochrome b6-f complex, which mediates electron transfer between photosystem II (PSII) and photosystem I (PSI), cyclic electron flow around PSI, and state transitions. Alternative names: Rieske iron-sulfur protein, RISP, ISP, plastohydroquinone:plastocyanin oxidoreductase iron-sulfur protein, proton gradient regulation protein 1This is a recombinant protein standard, source: Synechocystis PCC 6803.
Product Type:
Antibody
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Concentration: after adding 225 l of milliQ water final concentration of the standard is 0.15 pmol/ lProtein standard buffer composition: Glycerol 10%, Tris Base 141 mM, Tris HCl 106 mM, LDS 2%, EDTA 0.51 mM, SERVA Blue G250 0.22 mM, Phenol Red 0.175 mM, pH 8.5, 0.1mg/ml PefaBloc protease inhibitor (Roche), 50mM DTT.This standard is ready-to-load and does not require any additions or heating. It needs to be fully thawed and thoroughly mixed prior to using. Avoid vigorous vortexing, as buffers contain detergent. Following mixing, briefly pulse in a microcentrifuge to collect material from cap.This standard is stabilized and ready and does not require heating before loading on the gel. Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Application Details:
Standard curve: 3 loads are recommended (0.5, 2 and 4μl).For most applications a sample load of 0.2μg of chlorophyll will give a PsbA signal in this range.Positive control:a 2μl load per well is optimal for most chemiluminescent detection systems.This standard is stabilized and ready and does not require heating before loading on the gel. Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Reconstitution:
For reconstitution add 225 l of milliQ water, Please notice that this product contains 10% glycerol and might appear as liquid but is provided lyophilized
Molecular Weight:
33 kDa (larger than native protein due to the addition of His-tag), In most gel systems, PetC protein migrates at 23 kDa
Selected references:
Pipitone et al. (2021). A multifaceted analysis reveals two distinct phases of chloroplast biogenesis during de-etiolation in Arabidopsis. Elife. 2021 Feb 25;10:e62709. doi: 10.7554/eLife.62709. PMID: 33629953; PMCID: PMC7906606.Li et al. (2014). The nitrogen costs of photosynthesis in a diatom under current and future pCO2. New Phytol. 2014 Sep 25. doi: 10.1111/nph.13037.Wu et al. (2014). Large centric diatoms allocate more cellular nitrogen to photosynthesis to counter slower RUBISCO turnover rates. Front. Mar. Sci., 09 December 2014 | doi: 10.3389/fmars.2014.00068.
Special application note:
The PetC protein standard can be used in combination with global anti-PetC antibodies to quantitate PetC from a wide range of species. Global antibodies are raised against highly conserved amino acid sequences in the PetC protein.Quantitative western blot: detailed method description, video tutorial
Tubulin gamma chain is essential for the control of microtubular network. It is found at microtubule organizing centers (MTOC) such as the spindle poles
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at 4 C; Do not freeze. Do not exceed exipry date is provided on the tube. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
KLH-conjugated gamma-tubulin peptide EYHAATRPDYISWGTQ, amino acids 434-449. UniProt: P23258The epitope was located in the aminoacid sequence PDYISW (aa441-446 in human), which is identical for gamma-tubulin 1 and gamma-tubulin 2.
This antibody recognizes C-terminus (amino acids 434-449 in human) of gamma-tubulin, a 48 kDa structural constituent of cytoskeleton and microtubule organizing center (MTOC). The epitope which this antibody is recognizing is conserved in Arabidopsis thaliana Tubulin gamma-1 chain, UniProt: P38557, Gene ID: At3g61650 and Tubulin gamma-2 chain, UniProt: P38558, Gene ID: At5g05620Recommended secondary antibody: goat anti-mouse IgG1 AS16 3715
Tubulin alpha (TUA) together with beta tubulin is making up microtubules. The microtubules are intracellular dynamic polymers made up of evolutionarily conserved polymorphic alpha/beta-tubulin heterodimers and a large number of microtubule-associated proteins (MAPs). The microtubules consist of 13 protofilaments and have an outer diameter 25 nm. Microtubules have their intrinsic polarity; highly dynamic plus ends and less dynamic minus ends. Microtubules are required for vital processes in eukaryotic cells including mitosis, meiosis, maintenance of cell shape and intracellular transport.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid at 1 mg/ml.
Storage Temp:
Store in the dark at 2-8°C. Do not freeze. Avoid prolonged exposure to light. Do not use after expiration date stamped on vial label. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Tubulin alpha (TUA) together with beta tubulin is making up microtubules. The microtubules are intracellular dynamic polymers made up of evolutionarily conserved polymorphic alpha/beta-tubulin heterodimers and a large number of microtubule-associated proteins (MAPs). The microtubules consist of 13 protofilaments and have an outer diameter 25 nm. Microtubules have their intrinsic polarity; highly dynamic plus ends and less dynamic minus ends. Microtubules are required for vital processes in eukaryotic cells including mitosis, meiosis, maintenance of cell shape and intracellular transport.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid at 1 mg/ml.
Storage Temp:
Store at 2-8°C. Do not freeze. Do not use after expiration date stamped on the label. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Tubulin alpha (TUA) together with beta tubulin is making up microtubules.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at 4 C; Do not freeze. Do not exceed exipry date is provided on the tube. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
This antibody is recognizing defined epitope (amino acid 65-97) on N-terminal structural domain of alpha tubulin.Recommended secondary antibody, goat anti-mouse IgG1, HRP conjugated AS16 3715
Application Details:
1 : 500 (ICC), 1-4 g/ml /FlowCyt), 1-4 g/ml (WB)
Conjugation:
IgG1
Isotype:
IgG1
Purity:
Immunoglobulin Protein A purified in PBS. Contain 15 mM sodium azide.
Molecular Weight:
51 kDa
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Liu et al. (2022) Identification of positive and negative regulators of antiviral RNA interference in Arabidopsis thaliana. Nat Commun. 2022 May 30;13(1):2994. doi: 10.1038/s41467-022-30771-0. PMID: 35637208; PMCID: PMC9151786.
Special application note:
Metal induced stress affected the expression of tubulin, and that therefore, this protein cannot be used as a loading control under that type of conditions, data in application example,
Alpha-mannosidase cleaves the alpha form of mannose.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Rabbit
Species Reactivity:
Canavalia ensiformis (common jack-bean)
Immunogen:
native alpha-mannosidase purified from jack beans
Applications:
ELISA (ELISA), Immunofluorescence (IF), Immunohistochemistry (IHC), Western blot (WB)
The IgG (7S) fraction is prepared from the antiserum by ammonium sulphate precipitation and ion exchange chromatography
Application Details:
1 : 1000-1 : 100 000 (ELISA), (IF), (IHC), (WB)
Purity:
Purified IgG in PBS.
Reconstitution:
For reconstitution add 1 ml of sterile destilled water
Not reactive in:
Arabidopsis thaliana
Special application note:
Antibody potency and purity has been evaluated by immunoelectrophoresis, single radial immunodiffusion (Ouchterlony), ELISA,immunoblotting and enzyme inhibition
ARC5 (Dynamin-like protein ARC5) is a probable GTPase component of both plastid and peroxisme division machinery. Required for the last steps of plastid division specifically in mesophyll-cell, when the narrow isthmus breaks, facilitating the separation of the daughter plastids. Necessary for peroxisome activities. Seems to influence stromule (stroma-filled tubular extensions of the plastid envelope membrane) length and frequency. Alternative names: Dynamin-related protein 5B Protein ACCUMULATION AND REPLICATION OF CHLOROPLASTS 5.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Shelf life upon re-constitution is 6 months. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube. Store reconstituted antibodies at 4°Cor in -20 for extrended periods of time. Lyophilized powder is stable for a minimum of 2 years at -20 °C.
Host Animal:
Rabbit
Expected Species:
Arabidopsis thaliana
Immunogen:
KLH-conjugated synthetic peptide derived from internal domain of Dynamin-like protein ARC5 from Arabidopsis thaliana Uniprot: Q84N64,TAIR: AT3G19720
Antibody format is a total IgG (purified on Protein A)
Application Details:
1 : 500-1 : 5 000 (WB)
Purity:
Total IgG in Tris 0,1M, glycine 0,1M, sucrose 2%.
Reconstitution:
For reconstitution add 50 l of sterile water
Molecular Weight:
87 kDa
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Pipitone et al. (2021). A multifaceted analysis reveals two distinct phases of chloroplast biogenesis during de-etiolation in Arabidopsis. Elife. 2021 Feb 25;10:e62709. doi: 10.7554/eLife.62709. PMID: 33629953; PMCID: PMC7906606.
Urease (EC=3.5.1.5) is an enzyme involved in nitrogen metabolism. It is catalyzes the hydrolysis of urea into carbon dioxide and ammonia.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Rabbit
Species Reactivity:
Canavalia ensiformis
Expected Species:
Arabidopsis thaliana, Glycine max, Ricinus communis Species of your interest not listed? Contact us
Immunogen:
urease isolated and purified from Canavalia ensiformis (common jack-beans)
Applications:
ELISA (ELISA), Western blot (WB), Immunofluorescence (IF), Immunohistochemistry (IHC)
The IgG (7S) fraction is prepared from the antiserum by ammonium sulphate precipitation and ion exchange chromatography
Application Details:
1 : 1000-1 : 30 000 (ELISA), (IF), (IHC), (WB)
Purity:
Purified IgG in PBS.
Reconstitution:
For reconstitution add 1 ml of sterile destilled water
Molecular Weight:
91 kDa
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Special application note:
Antibody potency and purity has been evaluated by immunoelectrophoresis, single radial immunodiffusion (Ouchterlony), ELISA,immunoblotting and enzyme inhibition
The plant cell wall surrounds the plant cell as a complex network of polysaccharides classed as: cellulose, hemicelluloses and pectic polysaccharides and glycoproteins. Anchored to or embedded into plant cell wall are other polymers, like: lignin, suberin or cutin.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Store at +4°C(short term) and at -20 °C (long term).
Host Animal:
Rat
Species Reactivity:
Higher plants, ferns and mosses,Higher plants, ferns and mosses
Pedersen et a. (2012). Versatile high resolution oligosaccharide microarrays for plant glycobiology and cell wall research. J Biol Chem. 2012 Nov 6;287(47):39429-38.doi: 10.1074/jbc.M112.396598.
Special application note:
Contains 0.05% Sodium AzideReacts with grasses, sugar beet and spinach feruloyated polysaccharides. No cross-reactivity with non-feruloylated polymers outside these taxonomic groups
Arabinogalactans are polymers composed of arabinose and galactose monosaccharides. They exist in plants as free glycans or are attached to rhamnogalacturonan I or to protetein backbones. When attached to proteins they form arabinogalactan protein (AGP) which works as an intercellular signaling molecule. AGP also functions as a glue for sealing wounds in plants. Arabinogalactans can be used as an additive in food, and as a replacement for starch in food or pharmaceutical products.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Xylans are polysaccharides and belong to a group of hemicelluloses found in cell walls of plants and in red and green algae. Their backbones are built by beta-1,4-linked xylosyl residues.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Mouse
Species Reactivity:
Arabidopsis thaliana, Zea mays
Expected Species:
Higher plantsSpecies of your interest not listed? Contact us
Xylans are polysaccharides and belong to a group of hemicelluloses found in cell walls of plants and in red and green algae. Their backbones are built by beta-1,4-linked xylosyl residues.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Rhamnogalacturonans (RGs) are pectic polysaccharides found in the cell wall, which contain a repeating dissacharides backbone:α-D-GalpA-(1,2)-α-L-Rhap-(1)
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Rhamnogalacturonans (RGs) are pectic polysaccharides found in the cell wall, which contain a repeating dissacharides backbone:α-D-GalpA-(1,2)-α-L-Rhap-(1)
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Xyloglucans are polysaccharides commonly refered to as hemicelluloses found in the primary cell walls of vascular plants. This antibody binds to galactosylated side-chains of non-fucosylated xyloglucan-3, and appears to preferentially bind to the galactosylated side-chain closest to the reducing end of xyloglucan oligosaccharide sub-units (XLLG).
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Xyloglucans are polysaccharides commonly refered to as hemicelluloses found in the primary cell walls of vascular plants. This antibody binds to galactosylated side-chains of non-fucosylated xyloglucan-3, and appears to preferentially bind to the galactosylated side-chain closest to the reducing end of xyloglucan oligosaccharide sub-units (XXXG).
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
CCRC-M100 binds only to the xyloglucan sub-unit, XXXG, and shows no cross-reactivity with other xyloglucan sub-units tested, CCRC-M100 shows some cross-reactivity with sycamore pectic polysaccharides and linseed mucilage
Application Details:
Undiluted or at 1 : 10 (ELISA), (IF), (IHC)
Conjugation:
IgM
Isotype:
IgM
Purity:
Cell culture supernatant.
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Pattathil et al. (2012). Immunological approaches to plant cell wall and biomass characterization: Glycome Profiling. Methods Mol Biol. 2012;908:61-72.doi: 0.1007/978-1-61779-956-3_6.
Special application note:
Exact working dilution needs to be determined by end user
Xyloglucans are polysaccharides commonly refered to as hemicelluloses found in the primary cell walls of vascular plants. This antibody recognizes the glycan group of xyloglucan-2 in the non-fucosylated form.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
CCRC-M88 does not bind to XXXG, but does bind to other xyloglucan oligosaccharides, CCRC-M88 also binds to pectic polysaccharide preparations from several plants
Application Details:
Undiluted or at 1 : 10 (ELISA), (IF), (IHC)
Conjugation:
IgG1
Isotype:
IgG1
Purity:
Cell culture supernatant.
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Pattathil et al. (2012). Immunological approaches to plant cell wall and biomass characterization: Glycome Profiling. Methods Mol Biol. 2012;908:61-72.doi: 0.1007/978-1-61779-956-3_6. Patathil et al. (2010). A comprehensive toolkit of plant cell wall glycan-directed monoclonal antibodies. Plant Physiol. 2010 Jun;153(2):514-25.doi: 10.1104/pp.109.151985.
Special application note:
Exact working dilution needs to be determined by end user
Galactomannans are polysaccharides composed of a mannose backbone with side groups of galactose. They are used in food industry as stabilizers which increase water viscosity.Galactomannan is a component of the cell wall of the mold Aspergillus, and is released during its growth. Therefore, detection of this compound in blood is clinically used to diagnose aspergillosis infections in humans.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and over 1 month at -80°C. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Arabinogalactans are polymers composed of arabinose and galactose monosaccharides. They exist in plants as free glycans or are attached to rhamnogalacturonan I or to protetein backbones. When attached to proteins they form arabinogalactan protein (AGP) which works as an intercellular signaling molecule. AGP also functions as a glue for sealing wounds in plants. Arabinogalactans can be used as an additive in food, and as a replacement for starch in food or pharmaceutical products. This pectic polysaccharide antibody belongs to the arabinogalactan-4 group of antibodies. Pectin consists of polysaccharides found in the primary cell wall of most plants which binds cells together in the middle lamella.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Xyloglucans are polysaccharides commonly refered to as hemicelluloses found in the primary cell walls of vascular plants. This antibody recognizes the glycan group of xyloglucan-1 in the non-fucosylated form.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Mouse
Species Reactivity:
Arabidopsis thaliana, Solanum lycopersicum
Expected Species:
DicotsSpecies of your interest not listed? Contact us
CCRC-M101 does not bind to XXXG, but does bind to other xyloglucan oligosaccharides, CCRC-M101 also binds to pectic polysaccharide preparations from several plants
Application Details:
Undiluted or at 1 : 10 (ELISA), (IF), (IHC)
Conjugation:
IgG1
Isotype:
IgG1
Purity:
Cell culture supernatant.
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Pattathil et al. (2012). Immunological approaches to plant cell wall and biomass characterization: Glycome Profiling. Methods Mol Biol. 2012;908:61-72.doi: 0.1007/978-1-61779-956-3_6. Patathil et al. (2010). A comprehensive toolkit of plant cell wall glycan-directed monoclonal antibodies. Plant Physiol. 2010 Jun;153(2):514-25.doi: 10.1104/pp.109.151985.
Special application note:
Exact working dilution needs to be determined by end user
Xylans are polysaccharides and belong to a group of hemicelluloses found in cell walls of plants and in red and green algae. Their backbones are built by beta-1,4-linked xylosyl residues.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Mouse
Species Reactivity:
Betula sp., Eucalyptus sp., Populus sp., Sorghum sp., Triticum sp.
Expected Species:
Higher plantsSpecies of your interest not listed? Contact us
Xylans are polysaccharides and belong to a group of hemicelluloses found in cell walls of plants and in red and green algae. Their backbones are built by beta-1,4-linked xylosyl residues.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Mouse
Species Reactivity:
Arabidopsis thaliana, Avena sativa
Expected Species:
Higher plantsSpecies of your interest not listed? Contact us
Glucomannan is a water soluble polysaccharide which is found in secondary cell walls of some plant species.This antibody recognizes acetylated form of glucomannan.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Rhamnogalacturonans (RGs) are pectic polysaccharides found in the cell wall, which contain a repeating dissacharides backbone:α-D-GalpA-(1,2)-α-L-Rhap-(1)The antibody was raised against sycamore RG-I/MeBSA complex and binds to GalA1->4MeGalA1->4MeGalA1->4MeGalA1->4MeGalA1->4GalA pectic backbone.
Product Type:
Antibody
Antibody Type:
Monoclonal
Format:
Liquid
Storage Temp:
Antibody can be stored up to 1 month at 4 C, and at -80°Cfor up to 1 year. Make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Pattathil et al. (2012). Immunological approaches to plant cell wall and biomass characterization: Glycome Profiling. Methods Mol Biol. 2012;908:61-72.doi: 0.1007/978-1-61779-956-3_6. Patathil et al. (2010). A comprehensive toolkit of plant cell wall glycan-directed monoclonal antibodies. Plant Physiol. 2010 Jun;153(2):514-25.doi: 10.1104/pp.109.151985.
Special application note:
Exact working dilution needs to be determined by end user, Epitope structure for carbohydrate antigen: trimer or larger of beta-(1,6)-Gal carrying one or more Ara residues of unknown linkage
Research area:
Arabidopsis thaliana antibodies
Cookies:
X
We use cookies to help personalise and improve your web experience.
By using our website you consent to our use of cookies, some of which may have already been set on your device.
View our Cookie Policy to learn more.
