Goat anti-rabbit IgG (H&L) is a secondary antibody conjugated to HRP which binds to all rabbit IgGs in immunological assays.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1.1 ml of sterile water, add 1.1 ml of glycerol. Such solution will not freeze in -20 °C. If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard, Be sure to mix well but without foaming.
Host Animal:
Goat
Species Reactivity:
Based on IEP, this antibody reacts with: rabbit IgG heavy chains and light chains on all rabbit immunoglobulins
Immunogen:
Purified Rabbit IgG, whole molecule,
Applications:
ELISA (ELISA), Immunohistochemistry (IHC), Western blot (WB)
Immunogen affinity purified using solid phase rabbit IgG.
Reconstitution:
For reconstitution add 1.1 ml of sterile water. Let it stand 30 minutes at room temperature to dissolve. Spin centrifuge shortly to remove any particles. Prepare fresh working dilutions daily
Not reactive in:
Non-immunoglobulin rabbit serum proteins
Selected references:
Lim et al (2022). Arabidopsis guard cell chloroplasts import cytosolic ATP for starch turnover and stomatal opening. Nat Commun. 2022 Feb 3;13(1):652. doi: 10.1038/s41467-022-28263-2. PMID: 35115512; PMCID: PMC8814037.Miklankova et al. (2022) HYPK promotes the activity of the Nalfa-acetyltransferase A complex to determine proteostasis of nonAc-X2/N-degron-containing proteins. Sci Adv. 2022 Jun 17;8(24):eabn6153. doi: 10.1126/sciadv.abn6153. Epub 2022 Jun 15. PMID: 35704578; PMCID: PMC9200280.Hofmann, Wienkoop & Luthje (2022) Hypoxia-Induced Aquaporins and Regulation of Redox Homeostasis by a Trans-Plasma Membrane Electron Transport System in Maize Roots. Antioxidants (Basel). 2022 Apr 25;11(5):836. doi: 10.3390/antiox11050836. PMID: 35624700; PMCID: PMC9137787.Bychkov et al. (2022) The role of PAP4/FSD3 and PAP9/FSD2 in heat stress responses of chloroplast genes. Plant Sci. 2022 Sep;322:111359. doi: 10.1016/j.plantsci.2022.111359. Epub 2022 Jun 20. PMID: 35738478.Vitale et al. (2021) Light Spectral Composition Influences Structural and Eco-Physiological Traits of Solanum lycopersicum L. cv. 'Microtom' in Response to High-LET Ionizing Radiation. Plants (Basel). 2021 Aug 23;10(8):1752. doi: 10.3390/plants10081752. PMID: 34451797; PMCID: PMC8399554.
Special application note:
Concentration: 1.0 mg/ml.Antibody is provided in: 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1% BSA (w/v), Protease IgG free, 0.1 % (v/v) ProClin 150.Affinity purified antibody is >95% pure, according to SDS-PAGE.This antibody can used on a very wide range of samples from various species including many model plants, algae, diatoms and bacteria.
Pathogenesis-related protein 1 (PR-1) is partially responsible for acquired pathogen resistance. Induced by INA, salicylic acid and pathogen infection.This product is a recombinant PR-1 protein, trunctated by first 26 amino acids, source: Arabidopsis thaliana, UniProt: P33154, TAIR: At2g14610
Product Type:
Antibody
Format:
Lyophilized in glycerol.
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Concentration: after adding 90 l of sterile milliQ water final concentration of the standard is 0.10 pmoles/ lProtein standard buffer composition: Glycerol 10%, Tris Base 141 mM, Tris HCl 106 mM, LDS 2%, EDTA 0.51 mM, SERVA Blue G250 0.22 mM, Phenol Red 0.175 mM, pH 8.5, 0.1mg/ml PefaBloc protease inhibitor (Roche), 50mM DTT.This standard is ready-to-load and does not require any additions or heating. It needs to be fully thawed and thoroughly mixed prior to using. Avoid vigorous vortexing, as buffers contain detergent. Following mixing, briefly pulse in a microcentrifuge to collect material from cap.This standard is stabilized and ready and does not require heating before loading on the gel.Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Application Details:
Standard curve: 3 loads are recommended eg.0.5, 2 and 4μl.For most applications a sample load of 10-20 μg of protein will provide with a signal in this range.Positive control:a 2μl load per well is optimal for most chemiluminescent detection systems.This standard is stabilized and ready and does not require heating before loading on the gel.Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Reconstitution:
For reconstitution add 90 l of sterile water, Please notice that this product contains 10% glycerol and might appear as liquid but is provided lyophilized
Molecular Weight:
16,4 kDa
Special application note:
The PR-1 protein standard can be used in combination with anti-PR-1 antibodies to quantitate PR-1 protein. Quantitative western blot: detailed method description, video tutorialThis product can be sold containing ProClin if requested
The psbA gene has been cloned from many species of plants, green algae, and cyanobacteria. The psbA gene is located in the chloroplast genome and encodes for the D1 protein, a core component of Photosystem II. PsbA/D1 is rapidly cycled under illumination in all oxygenic photobionts. Tracking PsbA pools using the Global PsbA antibody can show the functional content of Photosystem II in a wide range of samples.This is a recombinant protein standard, source: Synechocystis PCC 6803.
Product Type:
Antibody
Format:
Lyophilized in glycerol.
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Concentration: after adding 95 l of sterile milliQ water final concentration of the standard is 0.25 pmoles/ lProtein standard buffer composition: Glycerol 10%, Tris Base 141 mM, Tris HCl 106 mM, LDS 2%, EDTA 0.51 mM, SERVA Blue G250 0.22 mM, Phenol Red 0.175 mM, pH 8.5, 0.1mg/ml PefaBloc protease inhibitor (Roche), 50mM DTT.This standard is ready-to-load and does not require any additions or heating. It needs to be fully thawed and thoroughly mixed prior to using. Avoid vigorous vortexing, as buffers contain detergent. Following mixing, briefly pulse in a microcentrifuge to collect material from cap.This standard is stabilized and ready and does not require heating before loading on the gel. Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Application Details:
Standard curve: 3 loads are recommended (0.5, 2 and 4μl).For most applications a sample load of 0.2 μg of chlorophyll will give a PsbA signal in this range.Positive control: a 2 μl load per well is optimal for most chemiluminescent detection systems.Non-disulphie dependent dimers and complexes can be also detected using standard western blot methods with more sensitive detection reagents as ECL Advance or West Pico when loading per well more standard than recommended. They have not been included in the standard calibration.This standard is stabilized and ready and does not require heating before loading on the gel. Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Reconstitution:
For reconstitution add 95 l of sterile water, Please notice that this product contains 10% glycerol and might appear as liquid but is provided lyophilized
Molecular Weight:
The standard has an actual MW of 41,5 kDa, The presence of a His6 tag causes it to run ~1,7 kDa higher on the gel than the native protein, Note that in most systems, PsbA migrates with an apparent MW of between 30 and 35 kDa,
Selected references:
Pipitone et al. (2021). A multifaceted analysis reveals two distinct phases of chloroplast biogenesis during de-etiolation in Arabidopsis. Elife. 2021 Feb 25;10:e62709. doi: 10.7554/eLife.62709. PMID: 33629953; PMCID: PMC7906606.Fern ndez-Gonz lez et al. (2020). Effects of Temperature and Nutrient Supply on Resource Allocation, Photosynthetic Strategy, and Metabolic Rates of Synechococcus Sp . J Phycol . 2020 Mar 4. doi: 10.1111/jpy.12983. Levitan et al. (2019). Structural and functional analyses of photosystem II in the marine diatom Phaeodactylum tricornutum. Proc Natl Acad Sci U S A. 2019 Aug 27;116(35):17316-17322. doi: 10.1073/pnas.1906726116.Ryan-Keogh et al. (2018). Seasonal regulation of the coupling between photosynthetic electron transport and carbon fixation in the Southern Ocean. Limnology and Oceanography.Yuan et al. (2018). Combined effects of ocean acidification and warming on physiological response of the diatom Thalassiosira pseudonana to light challenges. Mar Environ Res. 2018 Apr;135:63-69. doi: 10.1016/j.marenvres.2018.01.016.
Special application note:
The PsbA protein standard can be used in combination with global anti-PsbA antibodies to quantitate PsbA from a wide range of species. Global antibodies are raised against highly conserved amino acid sequences in the PsbA protein.Quantitative western blot: detailed method description, video tutorialThe goals when doing quantitative work:The sample PsbA must fall somewhere between the upper and lower standard loads. There should be at least 3 points on the standard curve.if possible, try to make the entire range of the curve around one order of magnitude or less (as in the application example).if possible, load <5 g total sample protein.1pmol of PsbA standard is a strong load for chemiluminescence, but may be appropriate for the less sensitive reagents, for example alkaline phosphatase.
Heat-shock protein 70 (Hsp70) is the major stress-inducible protein in vertebrates and is highly conserved throughout evolution. It plays a role as a molecular chaperone and is important for allowing cells to cope with acute stressor insult, especially those affecting the protein machinery. Heat shock cognate protein 70 (HSC70), is a highly conserved protein and a member of the family of molecular chaperones.Source of HSP70 standard: recombinant Hsp70 of Arabidopsis thaliana UniProt: Q9LHA8, TAIR: AT3G12580
Product Type:
Antibody
Format:
Lyophilized in glycerol
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Concentration: after re-constitution with sterile milliQ water final concentration of the standard is 0.15 pmoles/ lProtein standard buffer composition: Glycerol 10%, Tris Base 141 mM, Tris HCl 106 mM, LDS 2%, EDTA 0.51 mM, SERVA Blue G250 0.22 mM, Phenol Red 0.175 mM, pH 8.5, 0.1mg/ml PefaBloc protease inhibitor (Roche), 50 mM DTT.This standard is ready-to-load and does not require any additions or heating. It needs to be fully thawed and thoroughly mixed prior to using. Avoid vigorous vortexing, as buffers contain detergent. Following mixing, briefly pulse in a microcentrifuge to collect material from cap.This standard is stabilized and ready and does not require heating before loading on the gel. Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Application Details:
Standard curve: 3 loads are recommended (eg 0.1, 0.2, 0.3 pmol). Adjust range to fit your samples and your experiment. For most applications a sample load of 0.2 μg of chlorophyll/well will give a HSP70 signal in this range.Positive control: a 2 μl load per well is optimal for most chemiluminescent detection systems. Higher standard concentration needs to be used to allow detection by Coomasie stains. Such gels with higher standard concentration can not be used for quantitation using chemiluminescence.This standard is stabilized and ready and does not require heating before loading on the gel.Please note that this product contains 10% glycerol and might appear as liquid but is provided lyophilized. Allow the product several minutes to solubilize after adding water. Mix thoroughly but gently. Take extra care to mix thoroughly before each use, as the proteins tend to settle with the more dense layer after freezing.
Reconstitution:
For reconstitution add 82 l of steril water. Please notice that this product contains glycerol and might appear as liquid but is provided lyophilized. Final standard concentration is going to be 0.15 pmol/ l
Molecular Weight:
70 kDa
Special application note:
The HSP70 protein standard can be used in a combination with Agrisera global antibiodies (AS08 371) to quantitate HSP70 from a wide range of species. Global antibodies are raised against highly conserved amino acid sequence. Quantitative western blot: detailed method description, video tutorial
cpCK2 (Casein kinase II subunit alpha), chloroplastic is a chloroplast localized subunit of casien kinase4. It functions reduntantly with other alpha subunits (1, 2,and 3) in ABA mediated suppression of seed germination, lateral root development and flowering time. Alternative names: CK2-alpha41 Publication, Plastid-targeted casein kinase 2 alpha1, cpCK2alpha
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Host Animal:
Rabbit
Species Reactivity:
Arabidopsis thaliana recombinant cpCK2
Expected Species:
Camelina sativa, Glycine max, Cicer arietinum, Brassica napus, , Capsella rubella, Brasica rapa, Arabis alpina, Eutrema salsigeneum, Nocotiana sylvestris, cucumis sativus, Solanum tuberosum, Solanum penelli, Solanum lycopersicum, Theobrama cacao, Jatropha curcas, Populus trichocarpa, Populus euhratica, Ricinus communis, Citrus sinesis, Sesamum indicum, Cucumis melo, Morus notabilis, Gyssopium arboreum, Vitis vinifera, Medicago truncatula Species of your interest not listed? Contact us
Immunogen:
KLH-conjugated synthetic peptide derived from Arabidopsis thaliana CPCK2 protein UniProt: O64816, TAIR: AT2G23070
Donkey anti-rat IgG (H&L), is a secondary HRP (horse radish peroxidase) conjugated antibody which binds to rat IgGs in immunological assays.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C. If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard, Be sure to mix well but without foaming.
The optimal working dilution should be determined by the investigator
Purity:
Immunogen affinity purified donkey IgG.
Reconstitution:
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Selected references:
Bui et al. (2020). Differential submergence tolerance between juvenile and adult Arabidopsis plants involves the ANAC017 transcription factor. doi.org/10.1101/2020.02.12.945923 BioRxiv.
Special application note:
This antibody reacts with the heavy chains on rat IgG and with the light chains on all rat immunoglobulins based on immunoelectrophoresis.Minimum cross-reactivity is observed to non-immunoglobulin rat serum proteins by immunoelectrophoresis.Antibody is supplied in 10 mM sodium phosphate, 150 mM sodium chloride, pH 7.2, 10 % (w/v) BSA, Protease/IgG free and 0.1 % (v/v) Kathon CG is used as preservative. Use of sodium azide will inhibit enzymatic activity of horseradish peroxidase.
ATP synthase is the universal enzyme that synthesizes ATP from ADP and phosphate using the energy stored in a transmembrane ion gradient.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Acinetobacter baumannii, Algae, Cannabis sativa, Clostridium sp., Diatoms, Cyanobacteria, E.coli K-12, Vitis vinifera, Yersinia sp. Species of your interest not listed? Contact us
Immunogen:
KLH-conjugated synthetic peptide derived from available plant, algal (chloroplastic and mitochondrial) and bacterial sequences of beta subunits of F-type ATP synthases, including Arabidopsis thaliana chloroplastic ATP synthase subunit beta AtCg00480 and Arabidopsis thaliana mitochondrial ATP synthase subunit beta-1 At5g08670 as well as Chlamydomonas reinhardtii P06541 and A8IQU3
Applications:
Blue Native-PAGE (BN-PAGE), Immunofluorescence (IF), Western blot (WB)
Blue Native gel electrophoresis (BN-PAGE) has been performed on samples solubilized with digitonin (4:1) and loaded at 100 g/well. Gel thickness was 2 mm with 4.5-16 % gradient.Antibody is recognizing mitochondrial form of AtpB Subota el. al (2011).This antibody can be used as a loading control for bacteria, Bacillus cereus.
Cecchin et al (2021) LPA2 protein is involved in photosystem II assembly in Chlamydomonas reinhardtii. Plant J. 2021 Jul 4. doi: 10.1111/tpj.15405. Epub ahead of print. PMID: 34218480.Aihara et al. (2019). Algal photoprotection is regulated by the E3 ligase CUL4-DDB1DET1. Nat Plants. 2019 Jan;5(1):34-40. doi: 10.1038/s41477-018-0332-5.Jespersen et al. (2017). Metabolic Effects of Acibenzolar-S-Methyl for Improving Heat or Drought Stress in Creeping Bentgrass. Front Plant Sci. 2017 Jul 11;8:1224. doi: 10.3389/fpls.2017.01224. eCollection 2017. (western blot, Agostis stolonifera cv. ‘Penncross’)Rurek et al. (2015). Biogenesis of mitochondria in cauliflower (Brassica oleracea var. botrytis) curds subjected to temperature stress and recovery involves regulation of the complexome, respiratory chain activity, organellar translation and ultrastructure. Biochim Biophys Acta. 2015 Jan 21. pii: S0005-2728(15)00016-X. doi: 10.1016/j.bbabio.2015.01.005.Eom et al. (2014). Bacillus subtilis HJ18-4 from Traditional Fermented Soybean Food Inhibits Bacillus cereus Growth and Toxin-Related Genes. J Food Sci. 2014 Nov;79(11):M2279-87. doi: 10.1111/1750-3841.12569. Epub 2014 Oct 30.
Special application note:
This product can be sold containing proClin if requested.The anti-AtpB antibody will detect the mitochondrial form of the F1 ATP synthase subcomplex, as well as the chloroplastic CF1 Atp Synthase, and most known bacterial F-type Atp Synthases. Peptide used for antibody production is located in a beta sheet, which is partly exposed near the surface of the AtpB protein.
This blocking peptide can be used as a control to neutralize AGO1 | argonaute 1 before immunolocalization or western blot. Furter details are provided below.AGO1 belongs to a group of argonaute proteins which are catalytic component of the RNA-incudes silencing complex (RISC). This protein complex is responsible for the gene silencing (RNAi).
Product Type:
Antibody
Format:
Lyophilized
Storage Temp:
Store lyophilized/reconstituted at -20 °C; once reconstituted make aliquots to avoid repeated freeze-thaw cycles. Please remember to spin the tubes briefly prior to opening them to avoid any losses that might occur from material adhering to the cap or sides of the tube.
Due to its low molecular weight, this peptide is not suitable for separation on a SDS gel,
Reconstitution:
For reconstitution please add sterile water
Molecular Weight:
1716,9 Da
Special application note:
Estimation of the ratio between antibodies and peptide : In neutralisation assay use 9,16 g of argonaute 1 peptide for 10 ml of reaction volume. In case of any questions please contact support@agrisera.com
Goat anti-rabbit IgG, DyLight 594 Conjugate is a secondary antibody conjugated to DyLight 594, which binds to all rabbit IgGs in immunological assays.DyLight is a trademark of Thermo Fisher Scientific, Inc. and its subsidiaries.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Lyophilized
Storage Temp:
Store lyophilized material at 2-8°C. Product is stable for 4 weeks at 2-8°Cafter rehydration. For long time storage after reconstitution, dilute the antibody solution with glycerol to a final concentration of 50% glycerol and store as liquid at -20 °C, to prevent loss of enzymatic activity. For example, if you have reconstituted 1 mg of antibody in 1,1 ml of sterile water add 1,1 ml of glycerol. Such solution will not freeze in -20 °C, If you are using a 1:5000 dilution prior to diluting with glycerol, then you would need to use a 1:2500 dilution after adding glycerol. Prepare working dilution prior to use and then discard. Be sure to mix well but without foaming.
Based in immunoelectrophoresis, this antibody reacts with heavy chains on rabbit IgG and light chains on all rabbit immunoglobulins.No reactivity is observed to non-immunoglobulin rabbit serum proteins based in immunoelectrophoresis.Purity of this antibody is 95% based on SDS-PAGE.
For reconstitution add 1,1 ml of sterile water, Let it stand 30 minutes at room temperature to dissolve, Prepare fresh working dilutions daily
Not reactive in:
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Chong et al. (2015). Active fungal GH115 α-glucuronidase produced in Arabidopsis thaliana affects only the UX1-reactive glucuronate decorations on native glucuronoxylans. BMC Biotechnol. 2015 Jun 18;15:56. doi: 10.1186/s12896-015-0154-8.
Special application note:
Conjugate is present in 10 mM Sodium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) sodium azide is added as preservative.DyLight 594 (Ex = 593 nm; Em = 618 nm)
Goat anti-rabbit IgG is a secondary antibody conjugated to AP (Alkaline phosphatase) which binds to all rabbit immunoglobulins in immunological assays.
Product Type:
Antibody
Antibody Type:
Polyclonal
Format:
Liquid
Storage Temp:
Store liquid material at 2-8°Cup to 6 months.
Host Animal:
Goat
Species Reactivity:
Rabbit IgG heavy and light chains (H&L)
Expected Species:
Rabbit IgG Heavy and Light chains (H&L)
Immunogen:
Purified Rabbit IgG, whole molecule
Applications:
ELISA (ELISA) , Immunohistochemistry (IHC), Western blot (WB)
No confirmed exceptions from predicted reactivity are currently known
Selected references:
Hanschen et al. (2018). Differences in the enzymatic hydrolysis of glucosinolates increase the defense metabolite diversity in 19 Arabidopsis thaliana accessions. Plant Physiol Biochem. 2018 Mar;124:126-135. doi: 10.1016/j.plaphy.2018.01.009.Giovanardi et al. (2018). In pea stipules a functional photosynthetic electron flow occurs despite a reduced dynamicity of LHCII association with photosystems. Biochim Biophys Acta. 2018 May 24. pii: S0005-2728(18)30129-4. doi: 10.1016/j.bbabio.2018.05.013.Krasuska et al. (2015). Switch from heterotrophy to autotrophy of apple cotyledons depends on NO signal. Planta. 2015 Jul 18.
Special application note:
Antibody has been affinity purified on solid phase rabbit IgG (H&L)AP conjugate is supplied in 30 mM Triethanolamine, pH 7.2, 5 mM Magnesium Chloride, 0.1 mM Zinc Chloride, 1 % (w/v) BSA, Protease/IgG free. 0.05 % (w/v) of sodium azide is added as preservative
Research area:
Anti-Rabbit
Cookies:
X
We use cookies to help personalise and improve your web experience.
By using our website you consent to our use of cookies, some of which may have already been set on your device.
View our Cookie Policy to learn more.
